1) Fiber Optic Connector:

One set of fiber optic connector is supplied in CKD consisting of one set of housing and ferrule.

2) Fiber Optic Adapter:

a) Insertion Loss: less than 0.3dB;
b) Retention Force: 200g ~ 600g;
c) Durability (1000 times): less than or equal to 0.2dB;
d) Work Teperature Scope: -40 °C ~ +80 °C
e) Inner Sleeve: Zirconia

3) Fiber Optic Pigtail and Patch Cord

Patch cord is that the two ends of the fiber optic cable are installed with fiber optic connectors, and pigtail is that only one end of the fiber optic cable is installed with fiber optic connector.

a) Fiber optic cable in patch cord & pigtail:
- Fiber mode: Single mode (fiber diameter: 8.3/125um), and  multi-mode (fiber diameter: 62.5/125um or 50/125um);
- Simplex and duplex fiber optic cable are available;
- Outer diameter of fiber optic cable: 3.0mm, 2.0mm, 0.9mm, etc.;
- Fiber numbers in fiber optic cable: Single fiber, non-ribbon multi-fibers (4 fibers, 8 fibers, 12 fibers, etc.), and fiber ribbon (4-fiber ribbon, 8-fiber ribbon, 12-fiber ribbon, etc.);
- Length of fiber optic cable: Specified by customers
- Tensile strength: 15kg force

b) Polishing contact surface of fiber optic connectors in patch cord & pigtail:
- PC: spherical polishing (inertion loss: less than 0.3dB, return loss: more than 40dB);
- UPC: super spherical polishing (insertion loss: less than 0.2dB, return loss: more than 50dB);
- APC: 8 ° angled physical contact polishing (insertion loss: less than 0.2dB, return loss: more than 60dB)

c) Other technical data:
- Repeatability (1000 times): less than or equal to 0.2dB;
- Exchangeability: less than or equal to 0.2dB;
- Work temperature scope: -40 °C ~ +80 °C;

Back