2) Connector JXZ-1
10. Connector
1) General Technical Data of Connectors
a) Insulation Resistance: more than 50,000 Mohm
b) Dielectric Strength: no break-down and flying-arc under the conditions of AC power, 50Hz; 500v; 60seconds
c) Contact Resistance: less than 5 mohm
d) Pull-off Force: more than 24 N
e) Frequency of Operations ( tested manually): 200 times
2) Connector JXZ-1
a) Connector JXZ-1 is moisture-proof single body, which is used for two lines' connection.
b) Suitable Range of Conductor Diameters: 0.40mm ~ 0.70 mm
c) Maximum Outer Diameter of Conductor with Insulator: 1.52mm
d) Dimension After Press: 12.0 x 9.0 x 6.0 (mm)
3) Connector JXZ-2
a) Connector JXZ-2 is moisture-proof single body, which is used for two lines' connection.
b) Suitable Range of Conductor Diameters: 0.32mm ~ 0.90 mm
c) Maximum Outer Diameter of Conductor with Insulator: 1.80mm
d) Dimension After Press: 15.4 x 9.8 x 6.3 (mm)
4) Connector JXZ-3
a) Connector JXZ-3 is moisture-proof single body, which is used for three lines' connection ( or called multi-connection).
b) Suitable Range of Conductor Diameters: 0.40mm ~ 0.90 mm
c) Maximum Outer Diameter of Conductor with Insulator: 1.67mm
d) Dimension After Press: 19.4 x 12.0 x 5.8 (mm)
5) Connector JXZ-4
a) Connector JXZ-4 is moisture-proof single body, which is used for main lines' no-cutting connection.
b) Suitable Range of Conductor Diameters: 0.40mm ~ 0.70 mm
c) Maximum Outer Diameter of Conductor with Insulator: 1.27mm
d) Dimension After Press: 10.1 x 8.3 x 6.1 (mm)
a) Connector JXZ-5 is paired moisture-proof single body, which is used for tensile connection of subscriber inlet line with the medium-span ( 35m ~ 40m) and the load not more than 222N.
b) Suitable Range of Conductor Diameters: 0.90mm ~ 1.30 mm
c) Maximum Outer Diameter of Conductor with Insulator: 4.45mm
d) Dimension After Press: 56.0 x 18.8 x 10.3 (mm)
Click here to go on to "11. Patch Panel"
