HIGHWAVE TELECOM
PRODUCT LIST
- IDC Termination Module (Terminal Strip): for
wires' insulation-displacement-contact termination (10 pairs / 8 pairs / 5 pairs;
disconnection / connection / switching; for back mount frame mounting / for back rod frame
mounting);
- Back Mount Frame: IDC termination modules to be
mounted on it (module position numbers can be specified by customers; Back mount frame
assembly can be mounted on 19" rack.);
- Protector Magazine: for holding gas discharge tubes
and to be inserted in IDC termination module (for 3-pole / 2-pole gas discharge tubes; for
10-pair / 8-pair IDC termination module);
- Gas Discharge Tube (Arrester / GDT): to be fitted
in protector magazine for over-voltage protection and fail safe protection (230v / 250v; 2
poles / 3 poles);
- Unit Protector (one pair Protection Module): to be
inserted in IDC termination module for protection of telecommunication network against
over-voltage and over-current, with the functions of fail safe and LED lighting
alarming;
- Insertion Tool for IDC Termination Module:
for termination of wires into IDC termination modules and trimming of wires (DX-2 with
trim lock / DX-1 without trim lock);
- Accessories for IDC Termination Module: test cord
(2-core / 4-core), disconnection plug (1 pair / 10 pairs), label holder and hinged label
holder (for 10 pairs module / for 8 pairs module);
- Terminal Blocks for Cross Connection Cabinet (CCC)
and MDF (Main Distribution Frame): 25 pairs Terminal Block XJ-25 (for cross
connection cabinet), 100 pairs vertical protection block (for MDF) and 128 pairs
horizontal testing block (for MDF);
- Connector: for wire connection in
telecommunications network such as two lines' connection, three lines' connection, main
line's no-cutting connection, subscriber line's tensile connection, etc. (JXZ-1: UY,
JXZ-2: UY2);
- Patch Panel (Distribution Panel): used in machine room or distribution room for
distribution of CAT. 5e trunk lines and connection of terminal equipment and network
exchange equipment (24 ports / 48 ports, for standard 19" installation);
- 110 Distribution Frame: used in machine
room or distribution room. One side is for termination of voice / network trunk lines and
subscriber lines, and the other side is for connection of exchange joints of network
exchange equipment and telephone centers (50 pairs / 100 pairs);
- Cable Management Frame: used for cable
storage and management in 19" rack;
- RJ45 Module and RJ11 Module (Keystone):
RJ45 module is used for termination of CAT.5e cable in LAN for high-speed data
transmission.RJ11 module is used for termination of voice lines;
- RJ45 Plug and RJ11 Plug: RJ45 plug is
used for termination of CAT.5e cable in LAN for high-speed data transmission. RJ11 plug is
used for termination of voice lines (6p6c,
6p4c, 6p2c);
- Face Plate (Information Panel): compatible for both RJ45 module (plug) and RJ11
module (plug)(1 port / 2 ports / 4 ports);
- Patch Cord: for 110 module to 110 module, 110
module to RJ45 jack, RJ45 jack to RJ45 jack;
- Tools for Resident Network Cabling System: cramping
pliers (for both RJ45 plugs & RJ11 plugs), insertion tool (for 110 module),
twisted-pair stripping pliers (disposal tool for termination and stripping twisted-pair
wires);
- Fiber Optic Connector, Adapter, Pigtail and Patch
Cord: single mode / multi-mode, FC/PC (UPC), FC/APC, SC/PC (UPC), SC/APC, ST/PC (UPC),
MU/PC (UPC), LC/PC (UPC), ribbon fan-out pigtail, muti-fiber integrated pigtail;
ABOUT US
CONTACT US
HOME
HIGHWAVE TELECOM
Address: Meilin,
Futian, Shenzhen, China 518049
E-mail(1): highwave@szonline.net
E-mail(2): marketing@highwavetele.com
Web-site: http://www.highwavetele.com
粤ICP备05041207号